EURO 2K DTM HS Primer Sealer Gallon Kit Easy-sand & Hardener 1Qt. + 575 Bodyfiller 3L & BPO Paste 80g. FREE SHIPPING!
EURO 2K DTM HS Primer Sealer Gallon Kit Easy-sand & Hardener 1Qt. + 575 Bodyfiller 3L & BPO Paste 80g. FREE SHIPPING!
EURO 2K DTM HS Primer Sealer Gallon Kit Easy-sand & Hardener 1Qt. + 575 Bodyfiller 3L & BPO Paste 80g. FREE SHIPPING!

EURO 2K DTM HS Primer Sealer Gallon Kit Easy-sand & Hardener 1Qt. + 575 Bodyfiller 3L & BPO Paste 80g. FREE SHIPPING!

Regular price
$165.00
Sale price
$165.00

EURO Ultra DTM 2K Primer Sealer 1 Gallon
EURO Ultra 400 Hardener/Activator 1 Quart
Chamaleon 575 SOFT & PERFECT BODYFILLER 3 Liter
BPO Paste Tube 80 Grams
FREE SHIPPING!
  • Very easy to sand (the easiest DTM primer I ever seen so far)
  • Lays down perfect
  • As a primer 4:1 mix ratio
  • As a sealer 4:1:1 mix ratio
  • Can be used on plastic - One light coat Mix (4:1:1) - not as high build- adhesion promoter is recommended.
  • Available Colors: BLACK 460
  • One Gallon primer with one Quart Activator.
  • 2.1 VOC**
  • TDS & MSDS available upon request.

575 SOFT & PERFECT BODYFILLER - 3 Liter + BPO Paste 80g Tube:

  • Self-levelling 2K polyester lightweight body filler
  • Very smooth surface without pores
  • Adhesion to iron, steel, aluminum, galvanized substrates, GRP and wood
  • No sagging of the filler
  • Manufacture Color: Green
  • Made in Germany

General characteristics: Self-levelling 2K polyester lightweight body filler of low viscosity to even dents and irregularities in car repairs. Chamäleon Soft & perfect bodyfiller is characterized by its very smooth surface without pores which allows skipping the application of fine putty. Can be sanded already with high abrasion after a short drying time. Adhesion to iron, steel, aluminum, galvanized substrates, GRP and wood. No sagging of the filler.

Processing tips:
The substrate must be clean, dry and free from grease. Sand surfaces slightly. Remove not cured old paintwork and priming coats.
Do not apply on thermoplastic or acid products (wash-primer).
Mix well the body filler material with the hardener. Do not use more than 3% of hardener P! Under- or over-dosage of hardener may cause spotting in the finishing paint layer.
Clean and degrease the whole surface to be painted before every operation.
De-rust defective spots to bare metal and dry sand with sanding paper grit P80 / P150.
After drying, use sanding paper grit P150 / P240 for dry sanding. Sand the entire surface with dry sandpaper grit P240 / 360 to a matt finish before applying filler.
In case of filling work on non-ferrous metals (e.g. aluminum, zinced surfaces) it is possible to apply a priming coat to ensure an optimal adhesion before applying the body filler.
Do not overcoat without having isolated the surface with 1K or 2K filler.
Body filler can only be dry sanded.

**No shipping to 2.1 VOC States**

**No shipping to Alaska, Hawaii, Puerto Rico, US Protectorates or P.O. Box address because it’s flammable materials**

It is the responsibility of the purchaser/end-user to ensure they know and understand the regulations for their specific region, industry, application and end use and ensure that the products that they are using are compliant with all applicable regulatory requirements and any permits specific to their business.